HILOmirror Demister Foil is the simple and safe solution for steamed-up mirrors in small and large bathrooms, showers and en-suites of houses and apartments or hotels. It is easy to install the self-adhesive HILOmirror foil behind the existing or new mirrors.
You can simply integrate the HILOmirror Foil with bathroom lighting, so it switches only when you need it. For the larger bathroom mirrors, multiple HILOmirror Foil can be used.
Made by Scandinavian traditions
HILØ priorities are innovative products that save energy and easy to install. HILOmiror is a high-quality demister foil made by Scandinavian traditions, combining the best innovations and environment-friendly design.
Mirror heating foil HILOmiror is used to prevent mirror steam. These products are low-cost and easily installed, designed for new and renewable bathrooms.
HILOmirror foil is low-cost designed for the new and renewable bathroom mirrors. The self-adhesive HILOmirror Foil is Quick&Easy to install behind existing or new mirrors. It is quick and easily installed, by applying and simply sticking the adhesive foil on the back of a mirror.
You can simply integrate the HILOmirror Foil into the lighting circuit, so it only switches on when you need it. For the larger mirrors, multiple HILOmirror Foil can be used together.
Once installing HILOmirror foil forget about maintenance costs and enjoy your morning view after shower.
HILOmirror demister Foil is safe and has an IP44 safety class for wet areas such as bathrooms, shower rooms and en-suites. We care about your safety and environment, so we made HILOmirror foil halogen-free. Safe for you and good for the environment.
| Voltage | 230 V |
| Output | 25W |
| Thickness of HILOmirror foil | 1 mm |
| Connection cable | 1 m |
| Max temperature | +90 °C |
| Protection class | IP44 |
| Warranty | 2 year |
| Type | Output (W) | Dimensions (mm) | Order No. |
|---|---|---|---|
| HILOmirror 25 | 25 | 274×574 | 96651860 |
| HILOmirror 50 | 50 | 524×519 | 96651870 |
| HILOmirror 100 | 100 | 524×1004 | 96651880 |
There is no need for a thermostat for mirror heating. Mirror heating is used for a short time when taking a shower or bath to prevent the mirror from fogging. Mirror heating foil can be connected to the bathroom lighting, bath mirror lighting or by installing a separate switch.
Mirror heating foil is designed to heat the mirror and meets the technical requirements for this purpose. It is covered with laminated plastic, so it is not affected by moisture and does not damage the mirror.
The following powers are available:
HILOmirror 25, 25W,
HILOmirror 50, 50W,
HILOmirror 100, 100W.
One side of the HILOmirror heating foil is covered with glue, so you can simply stick it to the surface of the mirror and connected it to the bathroom or mirror lighting.
The HILOmirror foil should cover most of the mirror surface. However, if the mirror is too large, we recommend heating part of the mirror with one HILOmirror foil or two separate HILOmirror foils.
When heating one mirror with several HILOmirror foils, they should be connected in parallel.
HILOmirror foils are the following dimensions:
HILOmirror 25, 274 x 574mm,
HILO mirror 50, 524 x 519mm,
HILOmirror 100, 524 x 1004mm.
Bathroom HILOmirror heating does not need any control. It turns on and off with the bathroom light or mirror light switch.
HILOmirror foil can be attached to the other side of the hanging mirror when the mirror is hung on the wall and connected to the bathroom lighting.
HILOmirror foil is attached to the other side of the mirror and connected to the bathroom lighting.