HILOeco is a digital and reliable floor heating thermostat designed to meet the highest standards for energy efficiency – the European Eco-design Directive that helps lower the environmental impact by eliminating power wastage.
The HILOeco thermostat is a full-featured digital thermostat designed to the highest standards for the control of electric underfloor heating. Intuitive user interface for trouble-free programming and daily use with the possibility to integrate with external control. The thermostat has a minimum impact on the environment and provides long-lasting heating comfort with automatic night setbacks and pre-set heating schedules.
HILOeco thermostats with a comprehensive set of built-in functions can have direct control at home as a full-featured thermostat. Also, you can connect HILOeco to a compatible external controller for remote control. This HILOeco option helps you to make your electric floor heating part of your Smart Home.
Made by Scandinavian traditions
Perfectly in line with the design philosophy of HILØ the HILOeco full-featured digital thermostat is designed to the highest standards for control of electric underfloor heating. Meeting all requirements of the European Eco-design Directive the HILOeco helps to lower the environmental impact by eliminating power wastage.
HILOeco flexible features will ensure keeping the indoor temperature warm and comfortable regardless of different climate and individual needs. Therefore, you are now able to bring your electric floor heating solution in compliance with the requirements without the need for buying and installing any additional controllers.
HILOeco electronic thermostat with floor sensor is suitable for flush mounting in a standard wall socket is tailoring the heating to your specific needs. You can pre-programme the HILOeco in several ways which help you to reduce your energy consumption and heating cost.
The fully flexible programming of the build-in ‘4 Event Heating Schedule” allows you to adjust the heating to your specific needs for the day and week – intuitively. In case you change your plans, the HILOeco does not let you down. The ‘Manually Override’ function allows you to change the heating to match your actual needs with the push of a button.
The HILOeco has an intelligent ‘Adaptive Start’ function which automatically will adjust the heating to your specific environment. This ensures that you will be enjoying the right temperature at the right time. With the build-in ‘Open Window’ function activated the HILOeco helps save energy by pausing the heating when a sudden temperature drop happens e.g. when a window or a door to colder air is opened.
Once installing the HILOeco thermostat, you can forget about maintenance costs and enjoy optimal comfort at your home.
For your peace of mind, the high-quality HILOeco thermostat has 3 years warranty. The user-friendly HILOeco thermostat ensures, through the most intuitive user interface and self-explaining functions that you can go about your day without having to worry about coming back to a cold home. “Set and forget” – while connected and programmed the HILOeco will keep using your settings to make your floor comfortably warm.
The comprehensive set of built-in functions makes the HILOeco a full-featured thermostat for direct control at home. You can also choose to connect the HILOeco to a compatible external controller for remote control. This HILOeco option helps you to make your electric floor heating part of your Smart Home.
| Voltage | 230 V AC 50 Hz |
| Max load | 16 A / 3600 W |
| Control pollution degree | 2 |
| Software class | A |
| On / off switch | Interrupter 2-pole, 16A |
| Temperature range | +0 °C … +40 °C |
| Pre-programmed in factory | I-V, VI-VII mode |
| Design of control | PWM/PI |
| Stand by power | 0,5W |
| Sensor type | NTC |
| Sensor resistance | 14,8 kOhm at 20 °C |
| Output relay | Make contact - SPST - NO |
| Display | Segment |
| Dimensions | 84×84×20 mm |
| Protection class | IP21 |
| Warranty | 3 year |
| Type | Temperature range | Sensor | Model | Order No. |
|---|---|---|---|---|
| HILOeco antracite | +0 °C … +40 °C | floor and room | Elko | 19115971 |
Activate the thermostat by pressing any of the three buttons. The backlight will be lit. Hold the middle button for 8 seconds until the factory reset menu appears.
To deactivate the child lock, you need to hold pressed the “up” and “down” buttons simultaneously until the child lock symbol disappears from the display.
To activate the child lock, you need to hold and press the “up” and “down” buttons at the same time, then the “lock” child lock symbol will appear on the display.
The HILOeco thermostat has a child lock that will allow you to lock the thermostat settings.
The HILOeco thermostat has a frost protection function that can be selected in the thermostat menu settings.
The HILOeco thermostat has a pre-programmed timer function that allows you to select 4 or 2 heating modes.
When the floor heating is on, the three-wave symbol is displayed in the upper right corner of the thermostat, if it is not displayed, the floor is not currently heated.
If you want to choose, which temperature sensor to use yourself, you need to select it in the thermostat menu settings.
If you do not connect the floor temperature sensor, the thermostat will automatically switch to the room temperature sensor and control the heating system according to the room sensor data.
The HILOeco thermostat has floor and room temperature sensors.
E0: Internal fault. The heating is shut off.
E1: Built-in sensor fault. The sensor application is changed to C (regulator).
E2 (E-5E): External Sensor Error. (The sensor is either damaged, has shorted or disconnected). The sensor application is changed to C (regulator) If rF is used – the sensor application is changed to r (internal room sensor).
E5 (1-OH): Internal Overheat Internal overheating. If the E5 error persists, please contact your installer.
