HILOwood 80 aluminium underfloor heating mat is a very thin twin conductor of 80 W/m2 output with one connection cable, designed for dry installation method (without adhesive layer). It is suitable where the floor level height should be minimised as much as possible. This is the ideal solution for laminate, wood/parquet board flooring in new or renovated houses providing pleasant electric underfloor heating.
HILOwood 80 are ready to install heating mats that can be laid in the kitchen, hall, living room, children’s room, and bedroom under the wood/parquet boards and laminate flooring.
HILØ priorities are innovative products that save energy and easy to install. HILOwood is a high-quality aluminium heating mat, combining the best innovations and environment-friendly design.
Ultra-thin heating mat is designed with the latest technology by placing the fluoropolymer heating cable between two aluminium foil layers. The aluminium layers around the heating cable act as a heat dispersion medium and the earthling grid makes the product suitable for use in dry and wet areas like bathrooms under the laminate, wood/parquet boards.
HILOwood aluminium heating mat is ultra-thin with only 2, 8 mm height does not increase floor level. So thin that you will notice just a comfortable warmth.
HILOwood mat with twin conductor innovative fluoropolymer insulation ensures high reliability, making it durable and temperature resistant. In addition, it is energy-efficient and delivers comfort with even floor heat distribution.
HILOwood aluminium heating mat is easy to install and maintenance-free. Designed for the dry installation method, with a one-point power connection cable, is simple and quick to install, you can do it by yourself. You will complete the task fast, just with a couple of simple steps. Just, install hardwood or Steiko ekopor insulation on the floor, then lay HILOwood aluminium heating mat and finish flooring with laminate or wood/parquet boards. Note: laminate with metal clips cannot be used, and the thermostat should be connected by a certified electric engineer/professional.
Once installing the HILOwood heating mat you can forget about maintenance costs and enjoy a warm floor at your home.
For your peace of mind, the high-quality HILOwood has 10 years warranty. HILØ mats are long-lasting systems that run over 30 years.
HILOwood mat is designed with its 100% protective aluminium screen and combined with twin conductor mat technology to ensure a better indoor climate.
HILOwood aluminium mat is equipped with a protective aluminium screen connected to the earth of electrical installation. In case of an unexpected heating mat break, the system shuts down immediately without any risk.
We care about your safety and environment, so we made the HILOwood mat halogen-free. Safe for you and good for the environment.
| Voltage | 230 V |
| Type | Twin conductor |
| Output | 80 W/m² |
| Thickness of mat | 2,8 mm |
| Max temperature | +80 °C |
| Connection cable | 3 m |
| Min installation temperature | +5 °C |
| Min installation temperature | Fluoropolymer (FEP) |
| Protection class | IP67 |
| Width of mat | 50 cm |
| Warranty | 10 year |
| Type | Width × Length (m) | Area (m²) | Output (W) | Order No. |
|---|---|---|---|---|
| HILOwood | 0,5×6 | 3 | 240 | 90020058 |
| HILOwood | 0,5×8 | 4 | 320 | 90020060 |
| HILOwood | 0,5×10 | 5 | 400 | 90020062 |
| HILOwood | 0,5×12 | 6 | 500 | 90020063 |
| HILOwood | 0,5×14 | 7 | 560 | 90020064 |
| HILOwood | 0,5×16 | 8 | 640 | 90020065 |
| HILOwood | 0,5×18 | 9 | 720 | 90020066 |
| HILOwood | 0,5×20 | 10 | 800 | 90020067 |
Thin Steico underfloor ekopor layer or hardwood insulation can be used under HILOwood mats.
No. the HILOwood heating mat cannot be trimmed.
We recommend using the HILOeco thermostat with floor sensors. The floor temperature sensor controls the set temperature in the room, protecting the floor from overheating.
The thermostat is always required to be used with a HILOwood aluminium heating mat. We recommend using the HILOeco thermostat with floor sensors.
HILOwood mat should be connected with aluminium foil sheets side by side, connecting the HILOwood mat into one whole heating layer.
HILOwood aluminium foil sheets can be replaced with adhesive aluminium tape. The adhesive aluminium tape is thinner than the HILOwood foil sheets, so you need to glue two layers on each side of the HILOwood mat.
Additional HILOwood aluminium foil sheets are used to connect the HILOwood heating mat to a common electrical circuit. With aluminium sheets, connected aluminium foil serves as an earthling screen.
HILOwood heating mat dry installation does not require a concrete or adhesive layer. On the clean floor surface, you will need to apply a layer of hardwood or thin Steico underfloor ekopor. When the hardwood or Steico ekopor is applied, then install the HILOwood aluminium heating mat. Then your floor heating is read for laminate or wood boards flooring.
The resistance of the HILOwood heating mat is measured between the power cable conductors and the screen.
The resistance between the conductors should be of the same value as indicated on the mat label (Ω). The resistance between the screen and the conductors must be at least 0.5 MΩ.
No, the HILOwood heating mat cannot be used with carpet flooring.
No, the HILOwood heating mat cannot be used under the tiles.
Laminate or wood/parquet boards (without metal clips) can be installed on top of the HILOwood aluminium heating mat.
Several HILOwood aluminium heating mats can be installed in the room, but their power should not exceed 3.2kW.
Several HILOwood heating mats can be installed in the same room by connecting them in parallel to the thermostat. The total power of the HILOwood heating mats should not exceed 3.2kW.
HILOwood aluminium heating mat is designed for dry installation under the wood/parquet board. The heating system is installed in the following way: install hardwood insulation on the floor, then lay HILOwood aluminium heating mat and finish flooring with wood/parquet boards.
Note: laminate or wood/parquet boards with metal clips cannot be used.
HILOwood aluminium heating mat is designed for dry installation under the laminate. The heating system is installed in the following way: install hardwood insulation on the floor, then lay HILOwood aluminium heating mat and finish flooring with laminate.
Note: laminate with metal clips cannot be used.
HILOwood aluminium heating mat can be installed in the bathroom under laminate flooring or wood board flooring by dry installation. HILOwood heating mat cannot be installed under the tiles.
We recommend laying hardwood or Steico underfloor ekopor layer under HILOwood aluminium heating mat.
Yes, the HILOwood heating mat can be cut and rotated. Note: Do not cut or damage the heating cables.
